I moved my hands, waved it at the screen, and opened a new project.
I began to create the main technology behind my Movable Armour parts
It was difficult, to say the least. It was hard to create them and make them work, and I went through over 30 different models before I found the right one.
Once I was done with that, I ran some simulations of how the process of making it would be like using Jarvis.
All I had to do was enter all of the details and technical aspects, and Jarvis ran simulations of just how I could make the main processors and integrate it into the the armour and then connect all of the thrusters, camera etc to the processor inside the TRHDC-1 metal.
Only so that through the processor Jarvis will have control of how to piece of Armour will move.
The size of the processor was tiny, less than one cm, and the actual machines required to build something this small would also be something that would take time to acquire.
Jarvis ran a lot of simulations, reaching into the hundreds before Jarvis figured out the way to perfectly add the main processor to the bit of TRHDC-1 metal to create without destroying it in the process.
Or loosing the integrity of the TRHDC-1 metal piece.
I moved myself back from the table on the rolling chair as I spun around and let my mind relax a bit.
"Jarvis, can you order all of the materials I state?" I said before I began listing a long list of materials and machines, some much harder to find than others in large amounts.
"On it, sir," Jarvis reliably said as its voice went quiet for a few seconds before it spoke again.
"Sir, the time for delivery of all these materials and machines will take 2 days," Jarvis said.
With a sigh, I spoke, "Can you increase the time?" I asked, feeling annoyed, but Jarvis quickly responded back, "Unfortunately, sir, it will take that long to gather all of these materials and machines and then deliver them here."
Although I felt annoyed, I understood that it was only fair that it would take some amount of time, I thought as I glanced over at the time, and my eyes widened.
Over 5 hours had passed.
Silently I blinked my eyes in shock for a few seconds before I recovered.
I was honestly getting used to such things happening, I thought as I decided to get some food.
I got into the car and left the base and soon exited the mountain ranges and got myself some food.
I also took care of my basic hygiene and necessities.
Soon I was on my way back to the base to start work on the armor, hoping that it would be a quicker process compared to creating Nano Technology.
In less than an hour, I had made it back to the base, and I opened the project up again. In front of me appeared the 3D model of Mark 6.
I was going to build a suit that had similar properties to the Mark XLII, but I was going to do it my way, and it was going to be the first armor I created by myself.
And hopefully not the last... I thought as I felt my mood drop a little, but I quickly shook my head, riding it of depressing thoughts, and began the work.
First, I removed the outer frame of the armor and separated the internal and external parts of the Mark 6 armor.
I slowly began to edit the internal model of the Mark 6 and improved its designs, separated them into parts that could move on its own.
Then I focused on improving the flight systems so that it could keep up and if not, be faster than Starscream.
My goal was to make the speed reach up to Mach 4 when currently, the Mark 6 armor can only reach Mach 1 speed.
I decided to implement better and improved thrusters.
I upgraded them a lot, something I could not do before due to the overheating factor, but now I didn't have to worry about it as I had TRHDC-1 helping all the way.
I worked upon it for two hours minimum tweaking, experimenting, and running simulations before I believed it to finally be ready.
I had brought up the flight speed to Mach 4, a little slower than Starscream.
The jet that Starscream used could reach up to Mach 3, but I predicted that due to Starscream being the jet, Starscream could reach up to Mach 4.
I also began to improve the repulsors and started working on adding repulse stabilizer technology.
After that, I proceeded to improve the targeting system.
I upgraded the entire armor's material structure using TRHDC-1.
All that lacked in the armour was a melee weapon now.
But I was Satisfied with what I had so far, I split all the parts of the armor into modular parts and also split the external body of armor like that.
Then I proceeded to streamline the entire armor and cut out the parts of the armor that were useless now.
I added things such as EMP protectors on the surface of the armor to block any EMP blasts towards the armor.
These EMP blockers were powered by the Arc reactor and were hidden within the suit, so it couldn't be damaged and encased with an added layer of Titanium Alloy over TRHDC-1 metal for extra protection.
Thanks to the metal I was using, the entire armor's strength had taken a huge upgrade and was now a lighter piece of armor due to me removing the useless parts of the armor.
I also added many more sections for things such as missiles and rockets.
I also created energy absorbers.
TRHDC-1 which contains copper, signified by the "C" in its name, So because of that, I plan on creating a deffence against energy-based attacks.
The idea is that if the armor is hit by an energy attack such as plasma, it carries all the energy away from actually damaging the armor and supplies it to the Arc reactor.