After sleeping and waking up naturally the next day, Ye Qing lay lazily on the bed and stretched. Then go downstairs to open the door, wait for Conn and Harris to come in, then go to wash.
Today, the Chen Tuhao family went out to play, and the bidding for the sale of blue and white porcelain rifles has also been released. Ye Qing, who has been busy for a while, can finally rest for a while.
After washing, I walked out and saw four tattooed men in the shop. Ye Qing then thought of forgetting to explain to Kang En about the job training of Laceby and their security officers. Fortunately, this matter was also simple. Calling Kang En, and after a brief explanation, Kang En took the three of them to the shooting range behind the shop.
Asked if Harris and Sean, who were still in the hall, needed breakfast. After getting a negative answer, Ye Qing walked into the kitchen. I picked up a handful of rice in a hurry, put it in the rice cooker, and then began to prepare the ingredients for this morning's fried rice.
After eating the convenience food for three months, Ye Qing was tired of eating it. In addition, the food of the Silver Eagle Federation itself is indescribable. As early as World War II, three boxes of Federal Army rations were exchanged for one box of French Army rations. This has not changed much until now.
I still remember when I bought the goods, I saw the Federal Army Class C combat rations in the goods. Ye Qing was also quite interested in unpacking a package for a try, and finally saw the canned yellow meat bean mixture that looked like Xiang...
Well, in the C-grade rations. Gum is better...raisins are also good...
While thinking about these terrible experiences, Ye Qing cut and waited for the onions, potatoes and other side dishes for the fried rice. But after cutting, Ye Qing always felt as if he had forgotten something.
This hazy feeling lasted until Ye Qing finished breakfast. Only then did I remember that I had forgotten the blue and white porcelain pistol of Brother Hannah...
Sighing for his hard work, Ye Qing quickly threw the dishes into the sink. Then he walked outside the shooting range and started to light the brick kiln.
The structure of the M1911 pistol is not complicated. This old guy with a history of more than 100 years and older than Ye Qing's generation has also passed the copyright protection period. Its production structure diagrams are also searched on the Internet.
But despite this, the modification plan Ye Qing told David Koch last time was not lazy bullshit.
Since the M1911 pistol uses a short barrel rear seat structure, the locking mechanism is again a barrel offset type. As you can tell from the name, the core movement modules of the 1911 pistol are all deployed around the barrel. But the barrel is an area that Ye Qing can't touch at this time.
For the time being, I don't know whether high-tenacity porcelain can reach the service life of a normal metal barrel. Ye Qing does not have a rifling machine alone. And this kind of machine can't be bought with money. If there is no weapons production license issued by ATF, Ye Qing would not have the qualification to purchase it. The manufacturer of the machine will not take the risk to sell the equipment to Ye Qing.
Shake his head, throw these messy thoughts out of his head. After Ye Qing took a new M1911 from the warehouse, he walked into the studio.
Because only two parts of the sleeve and the grip clip are changed. Then dismantling the gun becomes extremely simple.
First pull the sleeve back to make the pistol in your hand enter the empty warehouse on-hook state, and check that it is correct. Then, while pressing the reentry spring with your hand, turn the barrel cover in a clockwise direction with the other hand. At this time, the return spring and the return spring pop out immediately.
Seeing this scene, Ye Qing did not rush to remove it. Instead, pull the sleeve back, and then take out the empty warehouse hanger lever, and then pull the sleeve forward. Take out the sleeve, barrel, hinge and other parts together.
Then stretched out his hand to lift the recoil spring guide rod and pulled it out from behind. The next step is to directly remove the reentry spring and the reentry spring cap, and then rotate the barrel sleeve that was rotated in the clockwise direction in front of it in the opposite direction. That is, after rotating in a counterclockwise direction, pull out the barrel cover from the front.
At this moment,
The entire sleeve. Except for the barrel and the hinges attached to the barrel, only the rear of the sleeve is left for being hit by the hammer and hitting the firing pin of the bottom fire of the bullet. Hold the sleeve in one hand, press the hinge of the barrel forward with the other, and take out the barrel. Then draw out the needle, this will solve the upper part of M1911, even if it is completed.
After finishing this step, Ye Qing took out the laser measuring instrument he had prepared and a blank A4 paper. While sketching out the three views of the sleeve's appearance with simple strokes, record the measured size data.
After doing this step, the next step is the grip clip.
In many people's minds, the grip clip is a purely decorative item. In terms of function, at most, it makes the shooter feel fuller when holding the gun.
Ye Qing thought the same before, but when Ye Qing used a screwdriver to remove the clip and saw its internal structure, he realized the fact that he was a younger brother. At the same time, I have to be amazed by the industrial design more than a hundred years ago.
In addition to the traditional manual insurance, the M1911 pistol is also designed with a concealed grip insurance. Although Ye Qing did not study the M1911 pistol in the system training ground, he learned the automatic structure of weapons for so many days. Slowly, Ye Qing also noticed the name hall.
This so-called grip insurance, the effective method is not complicated. Only in the grip, an extra part called the grip safety transmission lever is added, and a protruding tooth is added in front of this part.
The result of this is when the insurance is in the "launch" gear. If the grip is held tightly by hand, the grip safety transmission rod will be stressed, UU read www. Under the action of force, the protruding teeth on the front of uukanshu.com rotate above the trigger link. At this time, pull the trigger, the trigger link can be fully moved backward. Thereby driving the trigger lever to make the blocking iron run, thereby releasing the hammer and completing the firing action.
If you did not hold the grip when shooting. Then it will cause insufficient force on the grip safety transmission rod, and the protruding teeth cannot move above the trigger link. The subsequent trigger lever naturally cannot be moved back into place, so there is no way to drive the blocking iron to run. Under the obstruction of the blocking iron, the hammer could not be reset and hit the striker. As a result, the bullet lying in the barrel cannot be ignited by the primer, and the bullet naturally cannot be shot out.
After seeing this accidental discovery, Ye Qing couldn't help but become interested in this gun. This ancestral gun can last for so many years without being eliminated. In addition to its beautiful appearance and accurate shooting, it seems that there are some other good things in it that are not easy to find.
And such a careful observation really made Ye Qing discovered another amazing design.
The location of this design is the core component of bullet firing, the hammer. In addition to the normal slot to be issued, the M1911 pistol has a half-to-issuance slot that is almost unused and is extremely easy to be overlooked.
In order to find out the role of this card slot. Ye Qing brought an M1911 pistol from the warehouse again. After repeated experiments, Ye Qing finally figured out its function.
On the one hand, this card slot ensures the safe carrying of the pistol when there is ammunition. On the other hand, it is also the most indispensable function Ye Qing thinks. That is, if the hammer is in the slot to be issued, it is about to be launched. The barrier iron accidentally falls off, and then the barrier iron will slide into the half-to-be-issuing card slot to prevent the sudden release of the hammer from hitting the needle, thus avoiding the occurrence of fire.
If you like "The Big Brother's Life From The Gun Shop", please send the URL to your friends.
To bookmark this page, please press Ctrl + D. For the convenience of reading next time, you can also add the book to the desktop . To add a desktop, please click here .
Add an update reminder . When there are new chapters, an email will be sent to your mailbox.